WМожеби ќе треба да размислиме малку повеќе за купување мебел на отворено отколку кога купуваме внатрешен мебел. Тоа е затоа што мебелот на отворено е постојано изложен на сурови временски услови и материјалите може да бидат многу важни. Ако сакате вашите маси и столови да траат подолго на отворено, треба да бидете повнимателни да ги анализирате и споредите суровините што се користат за нивно производство пред да одлучите да ги купите.
Wкога станува збор за пластика, на сите не им е туѓо, но всушност, пластиката е многу големо семејство.
Пластика базирана на био
Bio-based plastics are made from renewable biological resources. For example, sugar cane is processed to produce ethylene, which can then be used to make polyethylene. Starch can be processed into lactic acid, which can then be used to produce polylactic acid (PLA).
Разградлива пластика
Degradable plastics are plastics that are degraded by microorganisms into water, carbon dioxide (or methane) and biomass under specific conditions.
Инженерска пластика
Engineering plastics offer higher performance than standard materials, making them ideal for harsh engineering applications. In many applications, they have gradually replaced traditional engineering materials such as wood or metal because they not only equal or exceed traditional materials in weight/strength ratio and other properties, but are also easier to manufacture, especially in applications with complex designs.
Епоксидни смоли
Epoxy resins have been around for over 50 years and are one of the most successful of the plastics family. Their physical state can change from a low-viscosity liquid to a high-melting solid, which means that a wide variety of materials with unique properties can be manufactured. At home, you'll find them transformed into soft drink bottles and a variety of packaging materials, and they're used as protective coatings for everything from beds, garden chairs, office and hospital furniture to supermarket carts and bicycles. They are also used in special industries, such as protecting the surfaces of ships, oil rigs and wind turbines from the effects of bad weather.
Експандиран полистирен
Expanded polystyrene or EPS is a widely used commodity polymer. It is widely used as a shockproof packaging material for machinery and equipment, instruments, household appliances, handicrafts and other fragile and valuable products, as well as for fast food packaging.
Флуорополимери
Fluoropolymers are known for their outstanding non-stick properties, which are associated with their use as coatings on cookware and as stain repellents for fabrics and textiles. They have also contributed to significant advances in aerospace, electronics, automotive, industrial processes (chemical and power sectors, including renewable energy), construction, food and pharmaceutical, and medical applications. The best-known member of fluoropolymers is PTFE (polytetrafluoroethylene).
Полиолефини
Polyolefins are polymers of polyethylene and polypropylene thermoplastics. They are produced primarily from petroleum and natural gas through the polymerization process of ethylene and propylene, respectively. Their versatility makes them one of the most popular plastics today.
Полистирен
Polystyrene is a synthetic polymer made from styrene monomer, which is a petroleum liquefaction product. It is a thermoplastic polymer that softens when heated and can be transformed into a variety of final products through semi-finished products such as films and sheets.
Полиуретан
Polyurethane is a flexible, pliable and durable man-made material. There are various types of polyurethanes that look and feel very different from each other. They are used in a very wide range of products. In fact, we are surrounded by products containing polyurethane in all aspects of our daily lives. While most people are not familiar with polyurethanes because they are often "hidden" behind covers or surfaces made of other materials, it is hard to imagine life without them.
Поливинил хлорид
Polyvinyl chloride was one of the first plastics to be discovered and one of the most widely used. It comes from salt (57%) and oil or natural gas (43%). It is the third most widely produced synthetic plastic polymer in the world, after polyethylene and polypropylene.PVC comes in two basic forms: rigid (sometimes abbreviated as RPVC) and flexible.
Термопластика
Thermoplastics are polymers that can be melted and recast almost indefinitely. They melt when heated and harden when cooled. However, when frozen, thermoplastics become glassy and break easily. This material can be repeatedly reheated, remolded and cooled. Therefore, thermoplastics are recyclable in production. Some of the most common types of thermoplastics are polypropylene, polyethylene, polyvinyl chloride, polystyrene, polyethylene phthalate, and polycarbonate.
Со толку многу одлични материјали кои се направени во разновиден мебел за отворено, пластичниот надворешен мебел е многу зелен производ кој не само што е издржлив и екстремно слабо се одржува, туку може целосно да се рециклира на крајот од својот корисен век.
Поради мазната површина, мебелот од пластичен надворешен мебел може лесно да се исчисти само со сапун и вода и партал, што го прави совршен избор за мрзливи луѓе.
Предности на пластичниот надворешен мебелï¼
The beauty of plastic outdoor furniture is that they require little maintenance.
Отпорен е на влага, нема мувла и се спротивставува на елементите без потреба од заптивки или лак.
Исто така е многу прифатлива, достапна во различни бои и може да изгледа како секој друг материјал.
Друга предност е тоа што пластичниот мебел е лесен и често се наложува
Може да се рециклира
Недостатоци на пластичниот надворешен мебелï¼
- Мебелот на отворено со пластична текстура може да не изгледа толку квалитетен
- Може да издува во екстремни временски услови
